/e/OS code sources for this laptop :
Download the Build
Get the /e/OS build to flash on your Laptop here
Installation guide
On a Linux computer
Extract the .gz archive
Insert a MicroSD card with minimum 8 GB storage
In the konsole run the code
sudo fdisk -l
this will display your SD card on the Konsole .
It would show up like
/dev/sdX
Tip: Please ensure you have selected the correct SD Card and not your Hard Disk as the next step will delete all data from it.
Warning: This search can also show your main hard disk so be very careful at this point to identify the SD card.
Now in the console type
sudo dd if=extacted-file-path of=/dev/sdX
where X will be the character that identifies your SD card and you got in the previous step
Open the SD card in a FileManager
There would be multiple partitions
Go to the BOOT partition
modify the uEnv.txt file
Change the variable “pinebook_lcd_mode” to match your device
could be batch1, batch2 or 1080p
Depending on your LCD settings.
Tip: In case the laptop does not boot then try a different setting
Please note: If you are still facing issues you can contact helpdesk - Paying customers can write in here with issue details. - Users who use the /e/OS or Murena cloud for free can write on the forum to seek assistance